Subscribe to Our Youtube Channel
Related Manuals for Warmlite WL45036
Summary of Contents for Warmlite WL45036
- Page 1 WASHINGTON FIREPLACE SUITE YOUR SAFETY & INSTRUCTION MANUAL WL45036 PLEASE READ CAREFULLY www.warmlite.co...
-
Page 2: Technical Data
TECHNICAL DATA Description: Washington Fire Suite Model: WL45036 Rated Voltage: 220-240V Frequency: 50/60Hz Power Consumption: 2000W DOCUMENTATION We declare that this product conforms to the following product legislation in accordance with the following directive(s): 2014/30/EU Electromagnetic Compatibility Directive. 2014/35/EU Low Voltage Directive. - Page 3 [EARTH] terminal. and immediately dispose of it in a safe manner. Never attempt to reuse the plug or insert it into a socket outlet as there is a danger of an electric shock. WARNING: This Appliance MUST be Earthed www.warmlite.co...
-
Page 4: Product Safety
PRODUCT SAFETY When using any electrical appliance, basic safety precautions should always be followed including the following: • Check that the voltage of the involved. main circuit corresponds with • Children should not play with the rating of the appliance the appliance. - Page 5 Ensure that the present. heater is not positioned close • DO NOT operate the heater to curtains, furniture or any combustible materials as this on a timer, or leave on overnight. could create a fire hazard. www.warmlite.co...
- Page 6 • When not being used, please unplug the heater from the mains socket. • Keep the mains lead away from the hot body of the heater and ensure that it is not pulled tight between the socket and the heater. •...
-
Page 7: What's In The Box
Power drill BEFORE YOUR FIRST USE: Remove your appliance from the packaging. Install your appliance in accordance with the installation & safety instructions. Your appliance is now ready for normal use. Dispose of the packaging in a responsible manner. www.warmlite.co... -
Page 8: Unpacking The Product
HANDLING Before continuing any further with the Please ensure that there is an accessible installation of this fire please read the following: electrical socket within the space for installation. The electrical socket must not be • One person should be sufficient to lift the behind or above the suite. - Page 9 NOTE: When the heater is first turned on, a slight odour may be present. This is normal and should not occur again unless the heater is not used for a long period of time. www.warmlite.co...
-
Page 10: Standby Mode
Flame Effect and Heating Mode: TEMPERATURE SETTING MODE: STANDBY-MODE: Press “MODE” to choose At the top right of the screen displays current Keep pressing “MODE” and the time and battery icon. temperature can be chosen in Fahrenheit or centigrade Press the Power Button to Turn on. The remote will be set to its previous Press the +/- button to adjust the status when activated... - Page 11 Press /> button to move to the next step • Always ensure that the correct tools are used to assemble/install this product. The temperature display will blink. • Always make sure the fire is firmly secured Press +/- switch to adjust the in place when complete. temperature. www.warmlite.co...
-
Page 12: Safety Cut-Out System
Note: When the fire is turned on for the first Don’t: time or when it has not been used for some • Never leave children unsupervised in a time, it may release a slight, harmless odour. room where the fire is ON and unguarded. This odour is a normal occurrence caused by the initial heating of the internal heating •... -
Page 13: Troubleshooting
The safety cut-out may have Follow the procedures as and then the heat operated. outlined in the “safety cut -out device” cuts out. section. No light LED not fitted correctly or Check the LED, if broken a replace. broken www.warmlite.co... -
Page 14: Cleaning And Care
CLEANING AND CARE WARNING! Always disconnect from the mains supply before cleaning the wall fire. For general cleaning use a soft clean duster - never use harsh abrasive or cleaners. The glass viewing screen should be cleaned carefully with a soft cloth. CAUTION! Allow the product to completely cool before handling or cleaning it. - Page 15 Model Identifier(s): WL45036 Item Symbol Valve Unit Item Unit Type of heat input for electric storage, local Heat Output space heaters only (select one) Nominal heat Manual heat charge with integrated Pnom output thermostat Minimum heat Manual heat charge control with room...
- Page 16 1 year peace of mind. *To receive your extra guarantee period, register your appliance online within 28 days of purchase by visiting: www.warmlite.co Make sure to retain your original receipt. Should you have a problem...
Need help?
Do you have a question about the WL45036 and is the answer not in the manual?
Questions and answers