Specifications; Sensor And Display Unit - dynafor LLX2 Operation And Maintenance Manua

2. SPECIFICATIONS

2.1 Sensor and Display Unit

Refer to the documentation for the LLX2 or LLXh sensors.
If an LLXt module is used, refer to the manufacturerʼs documentation covering the associated load
cell.
MODEL
Maximum capacity
Increment
Max. Display
Number height
Autonomy
Radio scope
RF technology
Weight
IP Protection
Usafe
Sensitivity to T°
Dimensions mm
For information, the radio range measured in laboratory is 80 m (60 m for IP 67) when the front
side of the sensor or of the LLXt module is pointing toward the back side of the display unit.
Caution! This range may differ depending on circumstances, in particular:
- presence of obstacles.
- electromagnetic interference.
- under certain atmospheric conditions.
If you have any trouble or if you have a specific utilisation, contact the Tractel
t
daN see technical datasheet for sensors
see technical datasheet for sensors
mm
m 80 (no obstacle) (I.P. 67 = 60)
kg
See technical data sheet 2027
9
Display
ALL
25
48 h
2.4 Ghz
0.180
I.P. 54
From - 20° to 40°C
0.05% per 10°C
GB
network.
®