Carrier PERFORMANCETSERIES EDGER THERMIDISTATT CONTROL TP-NRH-A Installation Instructions Manual page 5

A07052
Fig. 1 − PCB Breakout Jumper
Models
There are programmable and non−programmable models for all applications.
They can be configured for AC or HP, 1−or 2−speed compressor, and for Hybrid
Heatt installations, allowing it to be used in place of all Carrier thermostats.
Programmable Thermidistat Controls may be configured as non−programmable
if user desires.
Humidify Equipment and Connections
The humidify output connects directly to 24VAC operated humidifiers. An
isolation relay may be required when using powered humidifiers. No other
connection or interlock is required. Any of several installer−selectable operating
modes are available.
5