Download Print this page

Jet FLJ-45 Owner's Manual

Forklift jack

Advertisement

Quick Links

JET EQUIPMENT & TOOLS, INC.
A WMH Company
www.jettools.com
OWNER'S MANUAL
FLJ-45 Forklift Jack
P.O. BOX 1349
Auburn, WA 98071-1349
e-mail jet@jettools.com
Phone:253-351-6000
Fax: 1-800-274-6840
M-440445K 08/01

Advertisement

loading

Summary of Contents for Jet FLJ-45

  • Page 1 OWNER'S MANUAL FLJ-45 Forklift Jack JET EQUIPMENT & TOOLS, INC. P.O. BOX 1349 Phone:253-351-6000 A WMH Company Auburn, WA 98071-1349 Fax: 1-800-274-6840 www.jettools.com e-mail jet@jettools.com M-440445K 08/01...
  • Page 2: Limited Warranty

    JET will return repaired product or replacement at JET’s expense, but if it is determined there is no defect, or that the defect resulted from causes not within the scope of JET’s warranty, then the user must bear the cost of storing and returning the product.
  • Page 3: Specifications

    5. Do not get under vehicle while jack is being used as the only support. 6. If jack appears damaged in any way, found to be badly worn, or operates abnormally, it shall be removed from service. Contact your local JET distributor for the location of the nearest JET Authorized Repair Station.
  • Page 4: Troubleshooting

    Raising the Jack 1. Turn handle knob clockwise, until resistance is felt. Do not over tighten. 2. Place jack directly under object to be lifted. Check positioning under slight load to confirm jack or load will not slip, and is properly centered under load. 3.
  • Page 5 FLJ-45 Parts Breakdown...
  • Page 6 FLJ-45 Parts List Index Part Description Size Quantity 1 ..TS-2310162 ....Hex Nut ........... M16 .......... 2 2 ..FLJ45-2 ......Lock Washer ........... M16 .......... 2 3 ..FLJ45-3 ......Rod......................1 4 ..FLJ45-4 ......Hex Cap Screw ........M8x15 ........2 5 ..FLJ45-5 ......Lock Washer ........... M8 ..........2 6 ..FLJ45-6 ......Bushing ...........
  • Page 7 Index Part Description Size Quantity 54 ..SB-6MM ......Ball ............6mm ......... 6 55 ..FLJ45-55 .......Square Ring ..........8.8x4.4x6 ......... 1 56 ..FLJ45-56 .......Linkage..................... 1 57 ..SB-4MM ......Ball ............4mm ......... 1 58 ..FLJ45-58 .......Seat......................1 59 ..FLJ45-59 .......Spring............φ7.5x19.7 ......... 1 60 ..FLJ45-60 .......O-Ring* ...........
  • Page 8 JET EQUIPMENT & TOOLS, INC. P.O. BOX 1349 Phone:253-351-6000 A WMH Company Auburn, WA 98071-1349 Fax: 1-800-274-6840 www.jettools.com e-mail jet@jettools.com...