Graco GX21 Operation, Parts page 30

Cleanup
NOTE: Step 11 is for returning paint in hose
to paint pail. One 50 ft (15 m) hose holds
approximately 1 quart (1 liter) of paint.
11. To recover paint in hose:
a. Point gun into paint pail.
b. Disengage trigger lock.
c. Pull and hold gun trigger.
d. Place Prime/Spray valve in SPRAY
position.
e.
Press ON/OFF switch to power ON.
Button is illuminated when ON.
f. Continue to hold gun trigger until
you see paint diluted with flushing
fluid starting to come out of gun.
12. While continuing to trigger gun, quickly
move gun to redirect spray into waste
pail. Continue triggering gun into waste
pail until flushing fluid dispensed from
gun is relatively clear.
*
ti27151a
30
13. Stop triggering gun. Engage the trigger
lock.
14. Place Prime/Spray valve in PRIME
position.
15.
Press ON/OFF switch to power OFF. But-
ton is not illuminated when OFF.
16. On sprayers with a filter, see Cleaning
™
InstaClean Fluid Filter, page 31.
17. Fill unit with Pump Armor
fluid. See Storage, page 32.
18. Remove battery, see Battery Installa-
tion and Removal, page 13.
™
storage
3A8429B