Advertisement
CheckMate™ Striping Kit Installation Guide
For Model #'s: 21462, 21464, 21465, 21472,
1.)
Remove the Smart Stow rest (#1 in diagram below) by using a phillips head screw driver
to expose mounting hole.
2.)
Use a 5/16" drill bit to open the existing hole.
3.)
The Mounting bolt should be inserted through the widened hole. (Note that only
the threaded portion of the mounting bolt will pass through the hole). Install 5/16"
locknut onto threads and firmly tighten.
4.)
Connect CheckMate™ using side mount method:
(See Diagram on Page 2)
For Toro® Recycler™ Mowers
Installation Method A
21378, 21379, 21339, 21466
Advertisement
Table of Contents
Related Manuals for Big League Lawns CheckMate 21462
Summary of Contents for Big League Lawns CheckMate 21462
- Page 1 CheckMate™ Striping Kit Installation Guide For Toro® Recycler™ Mowers Installation Method A For Model #’s: 21462, 21464, 21465, 21472, 21378, 21379, 21339, 21466 Mounting: Remove the Smart Stow rest (#1 in diagram below) by using a phillips head screw driver to expose mounting hole.
- Page 2 Parts List Part Quantity 1/2” x 1” Bolt 1/2" Split Lock Washer 1/2" Nylon Lock Nut 3-Hole L-Bracket 3-Hole Swivel Bracket (Bolt Assembly Pre- Installed) 4-Hole Extension Bracket...
- Page 3 Installation Method B For Model #’s: 21352, 21332, 21328, 21356 Mounting: Remove the Rear Skirt (#1 in diagram below) by pulling out each end from housing. The Mounting bolt should be inserted through the exposed hole. (Note that only the threaded portion of the mounting bolt will pass through the hole). Install 5/16” locknut onto threads and firmly tighten.
- Page 4 Parts List Part Quantity 1/2” x 1” Bolt 1/2" Split Lock Washer 1/2" Nylon Lock Nut 3-Hole L-Bracket...
Need help?
Do you have a question about the CheckMate 21462 and is the answer not in the manual?
Questions and answers