Uncrating - Ice-O-Matic Hotel Dispenser CD300 Service & Installation Manual

Uncrating

Remove the carton from the skid. Cut the plastic straps that secure the leg kit to the skid and
remove the box.
Use the dispenser carton as a cushion and lay the dispenser down on its back. Remove the bolts
holding the skid to the machine, and separate the skid from the dispenser.
Install the dispenser legs into the threaded holes in the dispenser bottom. Screw them in hand
tight.
Return the unit to an upright position.
There are keys taped to the grill
below the ice dispensing area.
Remove them and save them for
later use.
Remove all shipping material and
tape. Record the model and serial
number on the Warranty
Registration form.
Leg Package Location
Page 4
CD300