Table of Contents
Advertisement
Set the
1. If the Set time option is grayed out, select the check box (un-check) next to the
time
Automatic date and time option. The Set date option should become available.
2. Select Set time. A screen similar to the following appears:
3. Use the up and down arrow keys to scroll to the hours and minutes of the time that
you want to set the monitor to.
4. When the time you want to set the monitor to appears, select Set. The time you set
appears under the Set time option:
5. Select the check box next to Automatic date and time to allow it to be automatically
updated when a service is available. A check mark appears to indicate that this option
is selected.
4/16/14
P4820EN.04
© 2014 Honeywell HomMed. All rights reserved.
Setting Advanced Features
3 - 33
Advertisement
Table of Contents
