Table of Contents
Advertisement
Configuring Monitors for Patients
Note:
The Video Conferencing feature requires a Wi-Fi communications network.
To connect to a Wi-Fi network:
1. From the Advanced Setting screen, select Wi-Fi Settings. If Wi-Fi is not turned on, a screen similar to
the following appears:
2. Select the Wi-Fi button. The button turns green and available networks appear under Wi-Fi Networks
and one may indicate that it is connected:
3. Select the Wi-Fi option to which you want to connect. A screen similar to the following appears:
4. If requested, type the password, as well as other requirements.
Note:
This password is determined by the network owner (e.g., the patient). Touch the screen
anywhere within the field. A keyboard appears to allow you to enter data. Select SYM to
display the numeric keypad.
3 - 28
© 2014 Honeywell HomMed. All rights reserved.
P4820EN.04
4/16/14
Advertisement
Table of Contents
