Trust 200DS Quick Start Manual
  1. Manuals
  2. Brands
  3. Trust Manuals
  4. Security System
  5. 200DS
  6. Quick start manual

Trust 200DS Quick Start Manual

Wireless alarm switch
Hide thumbs
1
2
3
4

Advertisement

Table of Contents

TRUST WIRELESS ALARM SWITCH 200DS
1

Introduction

This manual is intended for users of the Trust Wireless Alarm Switch 200DS. The
Wireless Alarm Switch 200DS can be used with Trust alarm systems from the 200
series.
With this wireless magnetic contact you can secure windows and doors. As soon as
contact is broken, i.e. when a window or door is being opened, the magnetic contact
will transmit a signal to the alarm centre. The magnetic contact is also provided with a
panic button in order to activate the alarm in case of emergency.
The magnetic contact is protected against sabotage and is sold with a 9V alkaline
battery
2

Safety

2.1
General
1.
Do not use this device in damp environments such as bathrooms, swimming
pools, etc.
2.
Do not try to repair this device yourself.
3.
Under the following circumstances disconnect the batteries and have the
device repaired by qualified personnel:
a)
Fluid has entered the device;
b)
The device has been dropped and/or the housing is damaged.
2.2
Batteries
1.
The magnetic contact's alkaline battery is not rechargeable. Do not try to
recharge these batteries. This may result in an explosion.
2.
Do not throw the batteries in an open fire. The batteries may explode.
3.
Never drill a hole in the batteries.
4.
Keep the batteries out of the reach of small children.
5.
When the batteries are empty, ask your local authority where you can dispose
of them.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 200DS and is the answer not in the manual?

Questions and answers

Related Manuals for Trust 200DS

Summary of Contents for Trust 200DS

  • Page 1 TRUST WIRELESS ALARM SWITCH 200DS Introduction This manual is intended for users of the Trust Wireless Alarm Switch 200DS. The Wireless Alarm Switch 200DS can be used with Trust alarm systems from the 200 series. With this wireless magnetic contact you can secure windows and doors. As soon as contact is broken, i.e.
  • Page 2 TRUST WIRELESS ALARM SWITCH 200DS Function description For a summary of the various functions of the magnetic contact, see figure 1 and the table below: Function Description Magnetic block Magnetic contact for detection of doors or windows being opened or closed.
  • Page 3 TRUST WIRELESS ALARM SWITCH 200DS Testing For testing the magnetic contact, follow the instructions below: Make sure the house code is the same as the one of the movement detector and the remote control. Push the magnetic contact’s ‘Panic’ button. If the alarm goes off the button works properly.
  • Page 4 If you still have any problems after trying these solutions, please contact one of the Trust Customer Care Centres. You can find more information on the last page of this electronic manual, as well as at the back of the quick installation manual. Please have the following information available: •...

Table of Contents