Inter-m EVAMATRIX RM-VA1000 Operation Manual page 16

EVAMATRIX SYSTEM REMOTE MIC STATION
- IN VA MODE, THE ACCESS LEVEL 3 PASSWORD INPUT SCREEN IS DISPLAYED.
1) Refer to the description about the keys used in the SETUP menu.
2) Select the MENU key to go to the next menu.
The menus are displayed in the order of Start Chime Set -> End Chime Set -> Talk Type -> Aux-In Set ->
VA Func Set -> Buzzer Set -> NETWORK INFO -> Firmware Version.
3) When selecting the PREV key, the standby screen is displayed.
4) Select the NUM key to change the Setup status.
5) The L3 means an access level in VA mode operation (displayed the same as in the SETUP menu).
- START CHIME SET SCREEN
1) Select the No. 1 key for None.
※ If set to None, Start Chime does not sound when you select the Chime Key.
2) Select the No. 2 key for 2Step up tone.
※ If 2step up tone is set, Start Chime sounds in the 2Step up tone when you select the Chime Key.
3) Select the No. 3 key for 4Step up tone.
※ If 4step up tone is set, Start Chime sounds in the 4Step up tone when you select the Chime Key.
4) In VA mode, the Chime Key does not work.
5) Select the MENU key to go into the next menu.
- END CHIME SET SCREEN
1) Select the No. 1 key for None.
※ If set to None, End Chime does not sound when you select the Chime Key.
2) Select the No. 4 key for 2Step up tone.
※ If 4step down tone is set, End Chime sounds in the 4Step down tone when you select the Chime Key.
3) In VA mode, the Chime Key does not work.
4) Select the MENU key to go to the next menu.
14 RM-VA1000