How To Set Up The Device And Precautions - Inter-m EVAMATRIX RM-VA1000 Operation Manual

EVAMATRIX SYSTEM REMOTE MIC STATION

How To Set Up The Device And Precautions

How To Set Up The Device And Precautions
1. BOOT SCREEN: AFTER THE POWER IS SUPPLIED, AN APPROPRIATE DESCRIPTION IS DISPLAYED ON THE
BOOT SCREEN
- INITIAL SCREEN
1) A "Welcome" message is displayed on the OLED screen when powering up and initializing the
operating system (OS).
2) When the app starts after OS initialization, the message disappears and then reappears after 5 seconds.
3) After displaying the "Welcome" message again, the "Booting ..." "Initializing ..." message is displayed
on screen.
- STANDBY SCREEN
1) When booting is completed, the standby screen is displayed with the device's IP information.
※ The default IP is 192.168.1.99. You can modify the IP in the device's web page.
2) To use the RM-VA1000 device, the API Key of the EVAMATRIX integrated management software should
be registered.
※ For more information, refer to the software manual.
3) The device and source (RM) should be registered by using the EVAMATRIX integrated management
software.
4) Set the PA Event at the Event & Preset (PA&VA) menu in the EVAMATRIX integrated management
software.
8 RM-VA1000