Inter-m EVAMATRIX RM-VA1000 Operation Manual page 11

5) Fault/emergency broadcasting status is displayed when the RM-VA1000 is in VA Mode.
M: RM MIC Fault (No microphone is attached to the RM-VA1000).
F: RM Network Fault (Cannot communicate with EVAMATRIX server), EVAMATRIX Synthesis Fault.
E: Emergency broadcasting is activated (EVAMATRIX has an active emergency broadcasting).
6) A buzzer rings when there is a Fault (When the buzzer setting is active).
2. USER AUTHENTICATION: WHEN OPERATING IN VA MODE, USER AUTHENTICATION IS REQUIRED
DEPENDING ON THE ACCESS LEVEL
- ACCESS LEVEL PASSWORD INPUT SCREEN
1) When selecting the emergency broadcast (Access Level 2) or setting menu (Access Level 3) from the
standby screen, you are required to input corresponding data.
2) Input 4-digit number with the numeric keys from 0 to 9.
3) All the Access Levels 2 ~ 4 are set to "0000" by default.
※ You can change the data at the System Management menu in the EVAMATRIX integrated management
software.
4) When selecting the PREV key, the standby screen is displayed.
3. SETTING VA / PA MODE: YOU CAN SEE HOW TO SET THE VA / PA MODE OF THE DEVICE
- VA FUNC SET MENU
1) You can select the MENU key on the standby screen to enter the Set menu.
※ For more information, refer to 7. SET menu.
2) Move to the VA Func Set screen in the SET menu.
3) Select the No. 1 key to disable the function. It works in PA Mode.
4) Select the No. 2 key to enable the function. It works in VA Mode.
5) When selecting the PREV key, the standby screen is displayed.
EVAMATRIX SYSTEM REMOTE MIC STATION
RM-VA1000 9