Bosch PLR 50 C Original Instructions Manual page 21

Operation
Using the touchscreen
Do not use the measuring tool if the touchscreen is visibly damaged (e.g. cracks in
u
the surface etc.).
A
B
C
– Lightly tap the relevant button (control). Do not tap the touchscreen with high pressure
or sharp objects.
– Do not bring the touchscreen into contact with other electrical devices or water.
– To clean the touchscreen, switch the measuring tool off and wipe off dirt with a mi-
crofibre cloth, for instance.
Start-Up
Never leave the measuring tool unattended when switched on, and ensure the
u
measuring tool is switched off after use. Others may be dazzled by the laser beam.
Protect the measuring tool from moisture and direct sunlight.
u
Do not expose the measuring tool to any extreme temperatures or variations in
u
temperature. For example, do not leave it in a car for extended periods of time. In case
of large variations in temperature, allow the measuring tool to adjust to the ambient
temperature before putting it into operation. The precision of the measuring tool may
be compromised if exposed to extreme temperatures or variations in temperature.
Avoid substantial knocks to the measuring tool and avoid dropping it. After strong
u
external influences on the measuring tool, you should always carry out an accuracy
check (see "Accuracy Check", page 25) before further work.
Switching On and Off
Press the button to switch the measuring tool and the laser on.
Bosch Power Tools
The display divides into the fields of status bar (A) and touch-
screen (B) with menu bar (C).
The status bar (A) shows the Bluetooth® connection status,
temperature warning and the state of charge of the non-re-
chargeable batteries/rechargeable batteries.
The measuring tool can be controlled by touching the buttons
using the touchscreen (B).
The menu bar (C) holds additional functions (e.g. Bluetooth®
on/off, menu, delete).
– Use only your fingers to operate the touchscreen.
English | 21
1 609 92A 6KZ | (20.08.2021)