Louvolite One Touch 1100 Series Instructions

5 6 7
Set-up upper limit
5. Press UP button on the remote to
move the blind up and press STOP
when desired upper limit is reached.
6. Press UP button and the motor
will run steps to set the upper limit
a ccurately.
7. Press CONFIRM button on the
r emote and the motor will jog 2
t imes, the upper limit is set.
Please note: The group channel will be recorded on the motor automatically when
the single channel has been programmed on the motor. Cycle through the channels
until all the lights are lit to access the group channel on the remote.
11 12
Delete mid-point limit
11. Press UP or DOWN button on
the remote to send blind to upper
or lower limit.
12. Press and hold LIMIT button first
then whilst holding LIMIT press
UP on the remote until the motor
jogs. Mid-point is now deleted.
FAQ: If the motor does not work:
• Please charge the motor battery first.
• If the motor does not stop at the required point, then the stops must be reset.
Louvolite Customer Services Tel: 0161 882 5050 Email: sales@louvolite.com
Visit the Louvolite website to view the links to all of our fitting instructional videos
www.louvolite.com
8 9
Set-up mid-point limit
8. Press UP or DOWN button on the
remote to move the blind and press
STOP when desired mid-point limit
is reached.
9. Press and hold the LIMIT button
first then whilst holding LIMIT press
UP button on the remote until the
motor jogs. Mid-point is now set.
10. Press STOP to move the blind to
Mid-point position.
Setting button (Red)
1
Delete original handset on motor
1. Press and hold SETTING button on
the motor mount and the motor will
jog (2-3 times in one motion) and
then release the button.
10
One Touch™ 1100 Series
Remote Control Operated
Lithium Re-chargeable Battery Motor Instructions
R1710 - Lithium Re-chargeable Battery Motor
Using R1720 - 5 channel remote control
Issue: 9/16