Download Print this page

Louvolite SC Series Fitting And Operating Instructions

Roller blind

Advertisement

Quick Links

Side Control Roller Blinds - Child Safety
Cord Cleat
For the installer
Cord cleat should be fixed by two screws in a
safe position, not accessible to children.
Always attach a Safety Warning Tag
For the consumer
Always wrap the chain
or chains around the
cleat after use.
Cord Tidy
For the installer
Split cord tidy, put chain into the male section,
insert female section into this. Keep cords and
chain taught, fix to wall or window frame at
side of the blind. Always attach a Safety
Warning Tag
For the consumer
Always ensure that the chain
remains housed within the
cord tidy.
Bell Toggle
The chain loop can be split and
the bell toggles attached to
each end of the chain.
WARNING
Young children can strangle in the loop of pull cords, chains and tapes, and
cords that operate window coverings. They can also wrap cords around their
necks. To avoid strangulation and entanglement, keep cords out of the reach
of young children. Move beds, cots and furniture away from window
covering cords.
"Complete elimination of the strangulation risk can only be achieved by keeping cords, chains, and tapes and similar
out of the reach of children. Use of additional safety devices may reduce the risk of strangulation but cannot be
considered foolproof ... Persons in charge of children are ultimately responsible for following the safety instructions
provided by the manufacturer. " EN 13120
Easybreak™ Connector
For the installer
Join operating chain by last ball of each end
into the larger holes on each side of the
connector.
When blind is raised, connector should be at
top of the blind on the chain length nearest
the window. Always attach a Safety
Warning Tag
For the consumer
If any reasonable weight is placed within the
loop, the Easybreak™ connector will break
apart. To re connect, check connector is not
damaged, then insert the end of the ball chain
into larger hole in the connector. Push home
leaving the chain in the same position as
before. Connector should be at the top of the
blind, on the side of the chain nearest to the
window when blind is raised.
SC Series™ Roller Blind
Fitting and Operating Instructions
for Systems 40® and 45®
Before attempting to fit your window blind,
please read the instructions carefully.
Louvolite, Ashton Road, Hyde, Cheshire SK14 4BG
Telephone: 0161 882 5000 Fax: 0161 882 5009 Email: sales@louvolite.com www.louvolite.com

Advertisement

loading

Summary of Contents for Louvolite SC Series

  • Page 1 Louvolite, Ashton Road, Hyde, Cheshire SK14 4BG considered foolproof ... Persons in charge of children are ultimately responsible for following the safety instructions Telephone: 0161 882 5000 Fax: 0161 882 5009 Email: sales@louvolite.com www.louvolite.com provided by the manufacturer. ” EN 13120...
  • Page 2 Blinds with Side Control Chain Control End View Bracket (in face fix position) Bracket Cover Bracket (in face Locating Spigot fix position) Locating Hook Bracket Cover Aluminium Tube Control End Bracket Cover Plunger End Bracket (in top fix position) Optional Easy Break Locating Slots Chain Connector Bracket Cover...

This manual is also suitable for:

4540