Advertisement
Quick Links
Advertisement
Related Manuals for Louvolite Roller Duo Roll
Summary of Contents for Louvolite Roller Duo Roll
- Page 1 Roller Duo Roll Fitting and Operating Instructions...
-
Page 2: Fitting The Brackets
Roller Duo Roll Fitting and Operating Instructions Carefully unwrap the roller blind and its associated brackets. The end brackets are universal and can be fixed in a top, face or side fix position. The intermediate brackets can be either top or face fix only. -
Page 3: Child Safety
Roller Duo Roll Fitting and Operating Instructions CHILD SAFETY Your blind will be supplied with either Easybreak connectors attached to the ® operating chain or a cord tidy that will need to be fitted to the wall. Easybreak System ®... - Page 4 Roller Duo Roll Fitting and Operating Instructions Cord tidy Disposable red tab Remove the disposable red tab by disengaging it from the chain and then pull out the disposable red tab. Disposable retaining thrust washer Disposable red tab Position the cord tidy to the wall at the furthest distance below the roller tube...
- Page 5 Roller Duo Roll Fitting and Operating Instructions Split the cord tidy and mark the remaining offset hole position before drilling and plugging both location holes if necessary. Screw into the offset hole to fix the back piece of the cord tidy to the wall.
- Page 6 Roller Duo Roll Fitting and Operating Instructions Push fit a cover cap over the screw hole opening. Cover cap...
- Page 7 Roller Duo Roll Fitting and Operating Instructions Fitting a face fix cord tidy. Position the face fix cord tidy to the wall at the furthest distance below the headrail adding appropriate tension to the chain and mark its location. Mark the remaining hole position before drilling and plugging both location holes...
- Page 8 Roller Duo Roll Fitting and Operating Instructions Attach the cord cover plate with the screw provided. Push fit a cover cap over the screw hole opening. Cover cap x 3...
-
Page 9: Note To Installer
Roller Duo Roll Fitting and Operating Instructions OPERATING THE BLIND. For a conventional roller blind, in order to lower the blind, pull the rearmost length of chain downwards with a smooth and steady pressure. To roll the blind up do the same on the front length of chain. - Page 10 Notes...
- Page 11 Notes...
- Page 12 Do not tie cords together. Make sure cords do not twist and create a loop. Also find us on: Louvolite Customer Services Tel: 0161 882 5050 Email: sales@louvolite.com Visit the Louvolite website to view the links to all of our assembly instructional videos www.louvolite.com...