CORAB WS-007W Installation Manual

CORAB WS-007W Installation Manual

Ground mounted system, double support rammed into the ground, 4 rows of landscape modules

Advertisement

CORAB WS-007W
INSTRUKCJA MONTAŻU
System wolnostojący, dwupodporony
wbijany w ziemię
4 moduły w rzędzie poziomo
Narzędzia potrzebne do montażu/Tools needed for installation:
wkrętarka/screwdriver
młotek 200-300 g/hammer 200-300g
01WS007W/2019/DP
Ground mounted system, double support
rammed into the ground,
4 rows of landscape modules
rozm./size 2 x 19 mm
koncówki - bity/
screwdriver bits
uchwyt montażowy/mounting bracket
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WS-007W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CORAB WS-007W

  • Page 1 CORAB WS-007W INSTRUKCJA MONTAŻU INSTALLATION MANUAL System wolnostojący, dwupodporony Ground mounted system, double support wbijany w ziemię rammed into the ground, 4 moduły w rzędzie poziomo 4 rows of landscape modules Narzędzia potrzebne do montażu/Tools needed for installation: rozm./size 2 x 19 mm wkrętarka/screwdriver...
  • Page 2 Elementy/Elements Indeks/index nazwa/name ilość modułów/ number of PV modules Nakrętka M12 Nut M12 Podkładka sprężysta M12 Spring washer M12 Śruba M12x30 Screw M12x30 Podkładka M12 Washer M12 Zatrzask wsuwany Slide clip Podpora przednia L=2400 Front support L=2400 Podpora tylna L=3450 Rear support L=3450 Belka wzdłużna L=11400 Horizontal beam L=11400...
  • Page 3 Montaż/Installation Widok z przodu/front view 4050 3900 4050 8100 8100 Widok z boku/side view Widok z tyłu/back view 01WS007W/2019/DP...
  • Page 4 Moduł PV module Szyny skośne montować przeciwstawnie Slanted beams mounted oppositely Wymiary ramy modułu/ Module frame dimensions 01WS007W/2019/DP...
  • Page 5 Zatrzask nie może zachodzić na otwory ramy, zaleceane jest przesunięcie Kompletny montaż zatrzasku/ co najmniej 10 mm od otworów./The frame’s holes should Module frame dimensions not interfere with the clip, we recommend o setting the clip at least 10mm away from the holes. Strefy styku elektrycznego/Electrical contact zones 01WS007W/2019/DP...

Table of Contents