Page 3
Slim Chair Assembly Instructions: Parts: 1x Seat 1x Backrest 1x Front Leg 1x Back Leg 2x Leg Plates 2x Side Panels 24x 30mm Screws Tools: Clamps Drill 3mm Drill Bit Driver Standard Steps: 1. Seat - S/O 2. Backrest - S/O 3.
Page 4
pull through. Add the screws to all four holes. Position the backrest in the same way on the side panel and clamp, go through the same process as the legs. Remove the clamps and flip the frame over, do the same again. Put the frame on it’s feet.