Removing Internal Antenna (Location 3) - Dell OptiPlex 5000 Micro Service Manual

Steps
1. Remove the adhesive tape from the internal antenna assembly.
2. Remove the adhesive tape from the chassis.
3. Align the internal antenna assembly to the chassis.
4. Replace the screw (M3x3MM) that secures the internal antenna assembly to the chassis.
5. Route the antenna-cable (black) under the EMI shielding with a tool.
Next steps
1. Install the WLAN card.
2. Install the side cover.
3. Follow the procedure in

Removing internal antenna (Location 3)

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the WLAN card.
About this task
The following images indicate the location of an internal antenna and provide a visual representation of the removal procedure.
44 Removing and installing components
after working inside your
before working inside your
computer.
computer.