Electrolux WT SL4 E 101 User Manual page 24

24 electrolux
Problem
Spinning starts late or the machine does not
spin:
The machine does not dry or does not dry
properly:
The machine makes an unusual noise:
No water is visible in the drum:
The display shows the alarm code
If you are unable to identify or solve the prob-
lem, contact our service centre. Before tele-
phoning, make a note of the model, serial
number and purchase date of your machine:
the Service Centre will require this informa-
tion.
Possible cause/Solution
The electronic unbalance detection device has
cut in because the laundry is not evenly distrib-
uted in the drum. The laundry is redistributed by
reverse rotation of the drum. This may happen
several times before the unbalance disappears
and normal spinning can resume. If, after some
minutes, the laundry is still not evenly distributed
in the drum, the machine will not spin.
• The laundry load is perhaps to little, add more
items, redistribute the load manually and then
select the spinning programme.
The drying time has not been selected.
• Select the drying time.
The water tap is not turned on.
• Open the water tap.
The drain filter is clogged.
• Clean the drain filter.
The machine is overloaded.
• Reduce the laundry load.
The selected drying time or dryness degree was
not suitable for the laundry.
• Select the suitable drying time or the dryness
degree for the laundry.
The machine is fitted with a type of motor which
makes an unusual noise compared with other
traditional motors. This new motor ensures a soft-
er start and more even distribution of the laundry
in the drum when spinning, as well as increased
stability of the machine.
Machines based on modern technology operate
very economically using very little water without
affecting performance.
Anti-flooding system has activated.
• Disconnect the appliance and contact the
:
Service Force Centre