Table of Contents
Advertisement
10 electrolux
EXTRA RINSE option (additional rinse)
This appliance is designed for saving water.
However, for people with a very delicate skin
(allergic to detergents) it may be necessary
to rinse the laundry using an extra quantity of
water (extra rinse). The relevant symbol will
appear on the display and this option is active
for selected washing programme.
If you wish to activate this option permanently
press simultaneously buttons 2 and 3 for a
few seconds: the relevant symbol appears
on the display. If you wish to cancel it press
the same buttons until the symbol disap-
pears.
Select the START/PAUSE (button 7)
To start the selected programme, press the
button 7 , the corresponding red pilot light
stops blinking.
The DOOR symbol appears on the display to
indicate that the appliance has started oper-
ating and the door is locked.
To interrupt a programme which is running,
press the button 7 : the corresponding red
pilot light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button 7
again. If you have chosen a delayed start the
machine will begin the countdown.
If an incorrect option is selected, the yellow
pilot light of the button 7 blinks 3 times and
the message Err is displayed for a few sec-
onds.
Select the DELAY START (button 8)
The corresponding symbol will appear on the
display. The wash programme can be de-
layed from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of 20
hours by means of this button.
Before you start the programme , if you
wish to delay the start, press this button re-
peatedly, to select the desired delay.
The delay time value will appear on the dis-
play for about 3 seconds, then the duration
of the programme will appear again. The se-
lected symbol appears on the display.
You must select this option after you have set
the programme and before you press the
button 7 .
You can modify or cancel the delay time at
any moment, before you press the button 7 .
The door will be locked throughout the delay
time. If you wish to add laundry in the ma-
chine during the delay time, press the button
7 to set the machine to pause. When the
Door symbol disappears, the door can be
opened. Add the laundry, close the door and
press the button 7 again.
Selecting the delayed start.
• Select the programme and the required
options.
• Select the delay start.
• Press button 7 : the appliance starts its
hourly countdown. The programme will
start after the selected delay has expired.
Cancelling the delayed start
• Set the washing machine to PAUSE by
pressing the button 7 ;
• Press button 8 until the symbol
played;
• Press the button 7 again to start the pro-
gramme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The Delay Start can not be selected with the
draining programme.
Altering an option or a running
programme
It is possible to change some options before
the programme carries it out. Before you
make any change, you must pause the
washing machine by pressing the button 7 .
Changing a running programme is possible
only by resetting it . Turn the programme
selector dial to
and then to the new pro-
gramme position. Start the new programme
by pressing the 7 button again. The washing
water in the tub will not emptied out.
Interrupting a programme
Press the button 7 to interrupt a programme
which is running, the corresponding light
starts blinking. Press the button again to re-
start the programme.
Cancelling a programme
Turn the selector dial to
gramme which is running. Now you can se-
lect a new programme.
Opening the door after the programme
has started
When the machine is working and through
the delay time, the door is locked. If, for any
' is dis-
to cancel a pro-
Advertisement
Table of Contents
