Advertisement
3.1.5 Removing the video board
(See Fig.8, 9)
(1) Disconnect the card wires from the connectors CN401,
CN402
of the video board. (See Fig.8)
(2) Remove the three screws H attaching the video board.
(See Fig.9)
3.1.6 Removing the tuner
(See Fig.9, 10)
(1) Disconnect the card wire from the connector
main board. (See Fig.10)
(2) Remove the two screws J attaching the tuner. (See Fig.9)
3.1.7 Removing the fan
(See Fig.9, 10)
(1) Disconnect the connector wire from the connector
of the main board. (See Fig.10)
(2) Remove the two screws K attaching the fan. (See Fig.9)
CN712
on the
CN708
H
CN712
CN708
CN401
CN402
Fig.8
J
K
Fig.9
Fig.10
(No.MB551)1-9
Advertisement
