Advertisement
3.1.3 Removing the front panel
(See Fig.5 to 7)
(1) Disconnect the card wire from the connector
power amplifier board. (See Fig.5)
(2) Disconnect the card wire from the connector
main board. (See Fig.5)
(3) Disconnect the connector wire from the connector
of the main board. (See Fig.5)
(4) Remove the two screws E and two screws F attaching the
front panel. (See Fig.6)
(5) Disengage the hook a. (See Fig.6)
(6) Disengage the two hooks b and then remove the front pan-
el. (See Fig.7)
3.1.4 Removing the rear cover
(See Fig.1)
(1) Remove the two screws G attaching the rear cover.
1-8 (No.MB551)
CN359
of the
CN706
of the
CN713
E
b
CN713 CN359 CN706
Fig.5
a
Fig.6
Fig.7
F
Advertisement
