Informa�On Inquiry - Roland FAVORITE ON-OFF Series Service Manual

• The unit will only change modes if the informa�on
from the remote control makes it necessary, not from
the unit's temperature se�ng.
• If the unit does not receive a signal for 7 minutes or
you press "Follow Me," the func�on turns off. The
unit regulates temperature based on its own sensor
and se�ngs.
1.15 Informa�on Inquiry
• To enter informa�on inquiry status, complete the
following procedure within ten seconds:
Displayed code
T1 Room temperature
Indoor coil
T2
temperature
Outdoor coil
T3
temperature
Displayed
Explana�on
value
-14—70
• Press LED 3 �mes.
• Press SWING 3 �mes.
• If you are successful, you will hear beeps for a certain
time.
• Use the LED and SWING bu�ons to cycle through
informa�on displayed.
• Pressing LED will display the next code in the
sequence. Pressing SWING will show the previous.
• The following table shows informa�on codes. The
screen will display this code for two seconds, then the
informa�on for 25 seconds.
Meaning
1. All displayed temperatures
2. All temperatures are
-14—70
3. If the actual value exceeds
Addi�onal Notes
use actual values.
displayed in °C regardless
of remote used.
the range, it will display
the maximum value or
minimum value.
Page 13