Warranty/Service - Beurer BC 27 Instructions For Use Manual

The serial number is located on the device or in the battery
compartment.
Technical information is subject to change without notification
to allow for updates.
• This device complies with the European stand-
ard EN 60601-1-2 (compliance with CISPR 11,
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-8) and is
subject to special precautionary measures with regard to
electromagnetic compatibility. Please note that portable
and mobile HF communication systems may interfere
with this device.
• The device complies with the EU Medical Devices Di-
rective 93/42/EEC, the German Medical Devices Act
(Medizinproduktgesetz) and the standards EN 1060-1
(Non-invasive sphygmomanometers – Part 1: General
requirements), EN 1060-3 (Non-invasive sphygmoma-
nometers – Part 3: Supplementary requirements for
electro-mechanical blood pressure measuring systems)
and IEC 80601-2-30 (Medical electrical equipment – Part
2 – 30: Particular requirements for the basic safety and
essential performance of automated non-invasive sphyg-
momanometers).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If the device is used for commercial medical
purposes, it must be regularly tested for accuracy by ap-
propriate means. Precise instructions for checking accu-
racy may be requested from the service address.

12. WARRANTY/SERVICE

Further information on the warranty and warranty conditions
can be found in the warranty leaflet supplied.
37