Download Print this page

Switching Off The Alarm Signal; Snooze Function - Youshiko YC8091 Instruction Manual

Msf radio control

Advertisement

"
" buttons to set the minute of snooze you need.
 Press "
" button to confirm your setting and to end the setting procedure.
F.Y.I.:
 After 20 seconds without pressing any button the clock switches automatically from setting mode to Normal
clock mode.
The alarm is repeatedly set to M-F, the alarm function will be activated from Monday to Friday, the Saturday
and Sunday will be invalid. The alarm is repeatedly set to S-S, and the alarm function will be activated on
Saturday and Sunday, and will expire from Monday to Friday. When the alarm is repeatedly set to display
both M-F and S-S, the alarm function will be activated throughout the week.
 the snooze time setting range: 5 ~ 60MIN, OFF, when set to OFF, means no snooze function. Snooze time
unit is minutes.
The alarm for opening and closing
 Press "
" button can switch the display ALARM1 time or ALARM2 time, in the alarm1 or alarm2 display
mode, press the "
 The alarm 1 or alarm 2 turn on, the "
The repeat of alarm icon at the same time is also displayed.
 The alarm 1 or alarm 2 turn off, the"
F.Y.I.:
 The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm
will be repeated automatically after 24 hours.
 Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is
heard.

Switching off the alarm signal

 The alarm sound when the trigger, press any button buttons or touch the " SNOOZE " character position and
hold for more than 2 seconds to stop the alarm signal.

Snooze function:

 When the time is up to the alarm, touch the " SNOOZE " character position, the alarm signal stops, and enter
the SNOOZE mode. After the snooze time is counted, the alarm will ring again.
 In snooze mode, press any button buttons or touch the " SNOOZE " character position and hold for more
than 2 seconds to exit the snooze mode.
" button to turn the alarm on or off.
" or "
" or "
"icon is displayed, the alarm 1 or alarm 2 function is open,
"icon disappears, the alarm 1 or alarm 2 function is close.

Advertisement

loading