Page 1
Youshiko YC8061 Radio control Digital Clock Initial set up: Install the batteries in the clock and then leave it, Keep it well away from other electronics devices nearby to avoid any interference , Radio control signal can or may take time, depends...
Page 2
Part A: A1: Time Display A4: Radio Controlled Icon A2: Day of Week A5: Humidity A3: Temperature A6: Date Part B: B1: “MODE/SET” button B5: “RESET” button B2: “▲” button B6: “SNOOZE” button ▼ B7: Alarm mode slide switch B3: “ ”...
Page 3
accurate timing. If reception fail, scanning stops (“ ” on LCD disappear) The clock can be set to scan the time signal manually by holding “ ” button (B3) for 3 seconds. Each reception takes about 5 minutes. Stop scanning by holding “ ”...
Page 4
from Monday to Friday or whole week from Monday to Sunday. Press “SNOOZE” (B6) button when alarm alerts. The alarm snoozes for around 5 minutes, then it alerts again. “ ” flashes on the LCD during the snooze time. This process can be repeated 7 times.
Page 5
According to Directive 2012/19/EU, the device is to be supplied at the end of its useful life to a proper disposal. The valuable materials contained in the device are supplied to recycling and avoid the burden of the environment. Please take this device to a collection point for electronic waste or a recycling center.
Page 6
• The specifications of this product may change without prior notice. • This product is not a toy, Keep out of the reach of children. • No part of this manual may be reproduced without written authorization of the manufacturer. All enquires: service@youshiko.co.uk...
Need help?
Do you have a question about the YC8061 and is the answer not in the manual?
Questions and answers