The best sound starts with a good fit Preset Modes Auto Power and Pair Create Custom Presets Changing Sleeves Use Screen Orientation to Adjust EQ Updating the Firmware for Shure AONIC products Button Functions Phone Call Functions SAFETY PRECAUTIONS WARNING FOR ALL EARPHONES! Troubleshooting...
Shure Incorporated ITW1 ® Shure Bluetooth Earphones Important Safety Information Before using this product, please read the warnings and safety instructions: SAFETY PRECAUTIONS ™ ShurePlus PLAY Mobile Listening App Unlock the full potential of your listening experience: more info here The best sound starts with a good fit •...
Page 4
Shure Incorporated 2. Select SHURE AONIC FREE from your device. 4/21...
Shure Incorporated Changing Sleeves • Gently twist and pull to remove sleeve. • Install the new sleeve so it completely covers the barb and nozzle. Button Functions Power on Press and hold the button until you hear an audible notification.
Shure Incorporated Activate voice assistant Press the button on either earphone 3 times quickly. Phone Call Functions Answer Press one time Press one time Decline Press and hold 2 seconds Environment Mode Press two times quickly Mute/Unmute Mic Press three times quickly ™...
To avoid this situation: • When pairing: Begin pairing mode with either earphone. Select "Shure AONIC FREE" in the Bluetooth device list. Power on the other earphone. • Already paired: power them both on at the same time Reset paired devices list You may find it necessary to reset the earphones.
Shure Incorporated Low battery Slow blinking red Charging case LEDs Earphones charging Earphones charge complete LED off Charging case low Charging case charging Orange Charging case fully charged Green Charging the earphones Insert the earphones into the charging case to charge.
Shure Incorporated Specifications Transducer Type Single Dynamic MicroDriver Sensitivity at 1 kHz 107 dB SPL/mW Impedance at 1 kHz 20 Ω Noise Attenuation up to 37 dB Frequency Range 21 Hz–17.5 kHz Net Weight 13.4 g (.5 oz.) Frequency 2402 to 2480 MHz Modulation Type GFSK, π/4DQPSK, 8DPSK RF Output Power 9.22 dBm EIRP (Left), 9.49 dBm EIRP (Right ) Antenna Type Integral antenna Antenna Gain -0.82 dBi (Left), -0.82 dBi (Right )
The ShurePlus PLAY Mobile Listening App is a high-resolution music player with advanced EQ controls. Play uncompressed audio files with your iOS or Android mobile device using the music tab. Use built-in Shure EQ presets to customize the sound, or create your own EQ presets in the settings tab. Unlock environment mode and ANC features by connecting to Shure wire...
Shure Incorporated PausePlus PausePlus accentuates the ambient noise around you when you pause your music. When you resume your music, you also re vert to any previous settings. To enable PausePlus, use the switch in the ShurePlus PLAY app. Button Controls You can customize the buttons for your earphones to control the features in the way that you want. You can control the button responses for: •...
Shure Incorporated Prompts & Tones You can select between voices, tones, and mute for the audio feedback that plays when events like power on/off, Bluetooth connection, etc. occur. After you have selected what type of prompt you want and the volume, you can further specify individual prompts for muting.
Tap Save to name and save your new custom preset. Custom presets will show up after the list of Shure presets. Duplicate a Preset You can duplicate both Shure and custom presets. Duplicating a preset is convenient if you like the way a preset sounds but you want to make and keep adjustments to the sound.
Use portrait mode to easily select and adjust frequency, gain, and bandwidth. Use landscape for a close-up view of your EQ curves. Updating the Firmware for Shure AONIC products Take advantage of additional features and design enhancements by updating the firmware on your AONIC product. To check...
Page 15
Shure Incorporated ◦ If both earphones do not automatically connect, tap the music tab and then tap back into the device tab. When an update is available, a green dot will appear next to Firmware Update in the device settings menu.
• Ensure that your mobile device is using the most current operating system (OS). Contact Shure Service and Repair if you experience any issues. SAFETY PRECAUTIONS Before using this product, please read and save the enclosed warnings and safety instructions.
Shure Incorporated WARNING • If water or other foreign objects enter the inside of the device, fire or electric shock may result. • Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Global Compliance Jakob-Dieffenbacher-Str.
At its sole option, Shure will repair or replace the defective product and promptly return it to you. In order for this warranty to be valid, the consumer must, at the time the product is returned, provide proof of purchase in the form of the original purchase re...
At its sole option, Shure will repair or replace the defective product and promptly return it to you. In order for this warranty to be valid, the consumer must, at the time the product is returned, provide proof of purchase in the form of the original purchase re...
Need help?
Do you have a question about the ITW1 and is the answer not in the manual?
Questions and answers