Power On/Off - FDS WINP User Manual

WINP – Wireless Input

2. Power ON/OFF

The ON/OFF button switch has 2 functions:
1) Battery status
Press and hold the ON/OFF button (front left)
LED green: > 60%
LED yellow: > 30%
LED red:
2) Switch ON – OFF the WINP
a) Press and hold (1sec. – 2secs.) the ON/OFF button until the battery LED status is Yellow
b) Immediately release the ON/OFF button and quickly repress it (within 1 second) and
hold down until the battery Led status briefly flashes Yellow and then turns to Green.
c) To switch OFF WINP, simply repeat step a and b (until the LED is OFF)
December 2021 - Version EN 1.3
www.fdstiming.com
< 30%
Status
ON/OFF
LED
Button
LED
Settings
Setup
Button
User manual