Technical Specifications - FDS WINP User Manual

WINP – Wireless Input
7. USB
The Mini-USB connector has various functions including:
 External power supply and battery charging
 Configure the WINP photocell options /parameters
 Update the Firmware
 Hardware reset in the unlikely event of a frozen WINP
(using the app "WIRC/WINP Setup & Reset")
8. How to update the WINP firmware
Updating the firmware is relatively simple. The software "FdsFirmwareUpdate" is required
Install the program "FdsFirmwareUpdate" on your computer
a)
b) Connect the USB cable to your PC and WINP
c) Run the program "FdsFirmwareUpdate"
d) Select the COM Port
e) Select the update file (.bin)
f) Press Start on the program (do not unplug the device during update)
g) The WINP transmitter will be updated
h) Once the update is complete, remove USB cable and switch ON the WINP transmitter

9. Technical specifications

Frequencies & Power :
Europe
India
Russia
North America
Japan (TBox-41 only)
Radio impulse precision
Min locking time
(between two detections)
Operating temperature:
External power input
Battery
Autonomy @20°C
Dimension
Weight
December 2021 - Version EN 1.3
www.fdstiming.com
869.4 - 869.65 MHz
865 - 867 MHz
868.7 - 869.2 MHZ
920 - 924 MHz
922 - 927 MHz
1/10'000 sec
200ms for Groups A-D
500ms for Groups E-H
-20°C to 60°C
Battery charge possible only between 0°C and 45°C
USB compatible (5V +/- 5%) up to 1A
LiPo 1700mAh
150 hours radio ON
93x58x27mm
200gr
User manual
100mW
100mW
100mW
100mW
20mW