• Do not use the heater near a shower, bath or swimming pool. • This appliance contains no user-serviceable parts. If it suffers any failure or damage, cease usage and contact help.Kogan.com for support after consulting the Troubleshooting section of this guide.
Page 4
OVERVIEW *KASMLFLMHTA model shown. Outer box Feet Internal packaging Main unit Screws Internal packaging...
Page 5
Front View *KALRGFLMHTA model shown. Switches Rear View...
Page 6
ASSEMBLY Remove the heater from the packaging with foam still attached and gently place it on a desktop or table. Remove the stand legs and attach them with the supplied screws. Place the heater upright once the legs have been installed.
OPERATION Connect the power cord to a power outlet and turn on the main switch. Switches High heat switch Low heat switch Turn the flame effect on/off Auto shutoff A cut-off switch is fitted to the heating element to prevent damage due to overheating. If it cuts-off due to an obstruction in the airflow, the heater must be allowed to cool for 15 minutes and the obstruction must be removed before restarting.
• Unplug and wait 10-15 minutes for any residual charge to leave the product and then try using the product again. • Check that the thermostat on the device is set above the current room temperature. If your issue is still not resolved, cease use and contact help.Kogan.com for support.
Page 12
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...