Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kogan SMARTERHOME KASTHFP2KWA
Summary of Contents for Kogan SMARTERHOME KASTHFP2KWA
- Page 1 KOGAN SMARTERHOME™ 2000W TOWER HEATER FIREPLACE EFFECT KASTHFP2KWA...
-
Page 2: Table Of Contents
Safety & Warnings Components Overview Assembly Operation Connect to SmarterHome™ App Google Home Control Amazon Alexa Control Cleaning & Care Specifications... -
Page 3: Safety & Warnings
SAFETY & WARNINGS Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference. WARNING — KEEP BATTERIES OUT OF REACH OF CHILDREN • Swallowing may lead to serious injury or death in as little as 2 hours, due to chemical burns and potential perforation of the oesophagus. - Page 4 • This heater supports voltages between AC 220–240V with a frequency of 50Hz. Ensure the socket used to power the heater matches this. • Do not use this heater on unstable or angled surfaces. • This heater is for indoor household use. Do not use this heater outdoors or for any other purpose.
- Page 5 • If the heater is damaged, stop use immediately and contact help.Kogan.com for assistance. • If the power cord is damaged, stop use immediately and contact help.Kogan.com for assistance. • If the heater has been dropped, stop use immediately and contact help.Kogan.com for assistance.
-
Page 6: Components
COMPONENTS • Tower heater body (x1) • Base plate halves (x2) • Mounting screws (x3) • CR2025 lithium battery (x1) • Remote control (x1) • Warranty card (x1) • User guide (x1) OVERVIEW Handle Control panel Air outlet Air inlet (behind) Power switch (behind) Flame effect display Base... - Page 7 Control panel LED display High heating mode indicator Low heating mode indicator Fan and power indicators Swing and flame effect indicators Temperature/timer Temperature/timer Increase button decrease button Wi-Fi indicator Flame effect Power button button Heating mode Timer button Oscillation button button Remote control Power button...
-
Page 8: Assembly
ASSEMBLY Before using the heater, the base plate must be assembled and fitted onto the heater. It consists of two halves. 1. Remove the heater, base plate halves, and mounting screws from the packaging. 2. Fit the half of the base plate that has the cable channel incorporated onto the bottom of the heater. - Page 9 4. Rotate the assembled base plate anti-clockwise to engage the base plate locking tabs with the heater. 5. Using a screwdriver (not supplied), secure the assembled base plate to the heater with the mounting screws.
-
Page 10: Operation
OPERATION Placement Ensure the tower heater is placed in an upright position and that there is at least a 1 metre clearance around the heater of any objects. The power switch should be in the ‘O’ position. Standby and powering on •... - Page 11 Timer The timer allows users to set the heater to turn off automatically after a pre-set number of hours. To set the timer: 1. Press the timer button ‘ ’ on the control panel or remote control. 2. Press the increase ‘+’ and decrease ‘–’ buttons on the control panel or remote control to select the desired number of hours (0–12) you wish the heater to turn off after.
- Page 12 Remote control battery replacement The remote control requires one CR2025 3V lithium battery to operate. 1. Place the remote control down with the buttons facing downwards. Using a screwdriver (not supplied), loosen the cover screw. Press on the release tab and pull out the battery compartment.
-
Page 13: Connect To Smarterhome™ App
Install App Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS). Register If you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS. To register: 1. Tap to enter registration page. - Page 14 Set device in pairing mode When the device is first turned on, it may automatically enter pairing mode (Wi-Fi indicator will be flashing slowly). If not automatically in pairing mode, ensure the heater has just been plugged in. Without pressing the power button, flick the power switch into ‘I’ position. The heater will enter standby and emit a beep.
- Page 15 7. Select “AP Mode” for the set-up type. 8. Ensure that the device is in pairing mode, with the Wi-Fi indicator flashing slowly, and tap “Confirm light is slowly flashing”. 9. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.
- Page 16 10. Follow the in-app prompts to continue AP Mode connection, which will pair your mobile phone to the device’s Wi-Fi hotspot to ensure a connection. Note: If the Wi-Fi hotspot does not appear on your phone in the list of available networks, your device may not be set in AP Pairing Mode correctly.
-
Page 17: Google Home Control
1. From the home page of the Google Home app, select the “+” icon to access the ‘Add and manage’ page. 2. Select ‘Set up device’, then under the Works with Google banner, select ‘Have something already set up?’ 3. Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service. - Page 18 4. Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and your devices. 5. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
- Page 19 7. Tap on any of the devices to view a list of available commands. Note: Please note that Google Home can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
-
Page 20: Amazon Alexa Control
AMAZON ALEXA CONTROL Note: You will need to have set up an Alexa account prior to linking your Kogan SmarterHome™ device. Adding “SmarterHome” to the Alexa app 1. From the home page of the Alexa app, select the “ ” icon in the top-right and select Skills &... - Page 21 3. Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa. 4. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
- Page 22 SmarterHome™ account. 7. When your devices have successfully connected to the Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa’s voice commands. Note: Please note that Alexa can only control the base/core functions of any compatible SmarterHome™...
-
Page 23: Cleaning & Care
CLEANING & CARE Before cleaning, ensure that the heater is switched off and unplugged from the power socket. Clean the exterior surface of the heater with a dry, soft cloth. Notes: • Do not use any detergents or solvents to clean the heater. •... - Page 24 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...