Next Level Racing ELITE Series Instruction Manual page 5

support@nextlevelracing.com
FRONT AND SIDE MOUNT
COCKPIT SETUP SKIP
TO STEP # 05
WHEEL DECK SETUP
)
A
01
A) Uninstall the Bolts securing the Wheel Plate to the Vertical Posts and remove the Wheel Plate.
B) Slide down the T-Nuts that were securing the Wheel Plate.
NOTE: Install T-Nuts suited for
your cockpit extrusion profile.
02
Install 4 x T-Nuts into the inside channel of both Vertical Posts. Repeat for the other side.
PARTS:
• • NIL
)
B
Repeat
on Other
Side
PARTS:
• • 8 x T-NUTS
FGT ELITE COCKPIT
GTELITE COCKPIT
8
WHEEL DECK T-NUT LOCATION
(VERTICAL POST INSIDE)
MOUNTING PLATES T-NUT LOCATION
(VERTICAL POST INSIDE)
03 Slide the T-Nuts in the Vertical Post to the locations shown above and repeat for the other
Vertical Post.
SKIP TO STEP 07
04
Re-Install the Wheel Plate previously uninstalled in STEP 01. Skip to STEP 07.
NOTE: Install T-Slot Nuts suited for
your cockpit extrusion profile.
FRONT/SIDE MOUNT SETUP
05
Install 4 x T-Nuts into the inside channel of the Left Vertical Post and slide them down using the
provided Allen key.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • NIL
PARTS:
• • NIL
Repeat
on Other
Side
PARTS:
• • 4 x T-NUTS
FGT ELITE COCKPIT
GTELITE COCKPIT
9