Installation; Electrical Connection - IKEA Lagan OV3 Manual

ENGLISH
Number of functions
Energy consumption
Energy Consumption with a standard
load and bottom heating
1) Information on the electrical connection, voltage and overall power is given on the rating plate (refer to "Product
description").

Installation

Caution! Refer to the assembly
instructions for the installation.
Warning! Only a qualified and
competent person must do the
installation of the appliance. If you do not
contact qualified or competent person, the
guarantee becomes invalid if there is
damage.
• Before you built in the appliance to the
kitchen cabinet make sure that the recess
dimensions are suitable.
• Make sure that there is anti-shock protec-
tion for the installation.
• According to the regulations of force, all
parts which ensure the anti-shock protec-
tion must be fixed in such a way that they
cannot be undone without tools.

Electrical connection

Warning! Only a qualified electrician
and competent person must do the
electrical installation.
• The manufacturer is not responsible if you
do not follow these safety precautions.
• Ground the appliance according to safe-
ty precautions.
• Make sure that the rated voltage and
type of power on the rating plate agree
with the voltage and the power of the lo-
cal power supply.
• This appliance is supplied with a mains
cable without plug.
• The yellow-green earth wire should be
2-3 cm longer than all other cables.
3
0,79 kWh
0,79 kWh
• The appliance can be placed with its
back and one side close to the higher ap-
pliances or walls. The other side must be
placed close to the furniture with the
same height.
• The built-in unit must meet the stability
requirements of DIN 68930.
• Built-in ovens and built-in cooking surfa-
ces are fitted with special connection sys-
tems. For safety reasons, you must only
combine appliances from the same man-
ufacturer.
• Any electrical component must be instal-
led or replaced by the After Sales Service
technician or qualified service personnel.
• Always use a correctly installed shock-
proof socket.
• Do not use multi-way plugs, connectors
and extension cables. There is a risk of
fire.
• Make sure that the mains plug is accessi-
ble after installation.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains
plug.
11