Subscribe to Our Youtube Channel
Related Manuals for turck TBEN-L-SE-U1 Series
Summary of Contents for turck TBEN-L-SE-U1 Series
- Page 1 Your Global Automation Partner TBEN-L…-SE-U1 Unmanaged 8 Port Ethernet Switch Instructions for Use...
- Page 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 3: Table Of Contents
Feedback about these instructions................ 5 Notes on the Product ......................... 6 Product identification..................... 6 Scope of delivery ...................... 6 Legal requirements...................... 6 Turck service........................ 6 For Your Safety............................ 7 Intended Use ........................ 7 General safety notes ....................... 7 Notes on UL approval ..................... 7 Notes on Ex protection.................... - Page 4 Table of Contents 13 Appendix: Approvals and Markings ..................... 22 14 Turck Subsidiaries - Contact Information .................. 23 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 5: About These Instructions
We make every effort to ensure that these instructions are as informative and as clear as pos- sible. If you have any suggestions for improving the design or if some information is missing in the document, please send your suggestions to techdoc@turck.com. V01.00 | 2021/11... -
Page 6: Notes On The Product
CAD files in numerous export formats. The contact details of Turck subsidiaries worldwide can be found on p. [} 23]. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 7: For Your Safety
The product is designed according to state-of-the-art technology. However, residual risks still exist. Observe the following warnings and safety notices to prevent damage to persons and property. Turck accepts no liability for damage caused by failure to observe these warning and safety notices. -
Page 8: Product Description
230.4 [9.07] mm [Inch] Fig. 2: Dimensions TBEN-LL-SE-U1 4.1.1 Display elements The device has the following LED indicators: Supply voltage Ethernet link Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 9: Properties And Features
Properties and features Fibre-glass reinforced housing Shock and vibration tested Fully potted module electronics Protection class IP65/IP67/IP69K UV-resistant according to DIN EN ISO 4892-2 Metal connectors 8 Fast Ethernet ports (10/100 Mbps) Operating principle The Ethernet switch TBEN-L…-SE-U1 is used to build industrial Ethernet networks according to IEEE 802.3. -
Page 10: Installing
Mount and screw the housing cover according to the following figure. The tightening torque for the Torx T8 screw is 0.5 Nm. Fig. 3: Mounting the device in protection housing TB-SG-L Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 11: Mounting Onto A Mounting Plate
Mounting onto a mounting plate NOTICE Mounting on uneven surfaces Device damage due to stresses in the housing „ Fix the device on a flat mounting surface. „ Use two M6 screws to mount the device. The device can be screwed onto a flat mounting plate. „... -
Page 12: Grounding The Device
The shielding of the M12 flanges for the I/O level is connected to the reference potential of the installation via the M6 metal screw. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 13: Connecting
Connecting NOTICE Intrusion of liquids or foreign bodies through leaking connections Loss of protection class IP65/IP67/IP69K, device damage possible „ Tighten M12 connectors with a tightening torque of 0.6 Nm. „ Tighten 7/8” connectors with a tightening torque of 0.8 Nm. „... -
Page 14: Connecting The Power Supply
System voltage: power supply 1 (incl. supply of electronics) Load voltage: power supply 2, fed through, not used in device Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... - Page 15 TBEN-LL-SE-U1 For the connection to the power supply, the device has two 5-pin, L coded M12 connectors. V1 and V2 are galvanically isolated. The maximum tightening torque is 0.6 Nm. Fig. 12: M12 connector for connecting the supply voltage „ Connect the device to the power supply according to the pin assignment shown below. „...
-
Page 16: Supply Concept
The device is supplied via V1. All Ethernet ports are galvanically isolated. V2 is fed through. Fig. 14: Supply TBEN-L4-SE-U1 Fig. 15: Supply TBEN-LL-SE-U1 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 17: Operating
Operating LED displays LED PWR Meaning No voltage connected or under voltage at V1 Green Voltage at V1 OK NOTE Each of the Ethernet ports XF1…XF8 has an LED L/A. LED L/A Meaning No Ethernet connection Green Ethernet connection established, 100 Mbps (XF1…XF8) Yellow Ethernet connection established, 10 Mbps Green flashing... -
Page 18: Troubleshooting
If there are no faults, there is a device malfunction. In this case, decommission the device and replace it with a new device of the same type. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 19: Maintenance
Observe our return acceptance conditions when returning the device to Turck. 10.1 Returning devices Returns to Turck can only be accepted if the device has been equipped with a Decontamination declaration enclosed. The decontamination declaration can be downloaded from https://www.turck.de/en/retoure-service-6079.php and must be completely filled in, and affixed securely and weather-proof to the outside of the packaging. -
Page 20: Technical Data
According to IEC 60068-2-31/IEC 60068-2-32 Electro magnetic compatibility According to EN 61131-2 Approvals and certificates UV-resistant according to DIN EN ISO 4892-2A (2013) Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... - Page 21 Technical data General Information Dimensions (B × L × H) 64 × 230.4 × 39 mm Operating temperature -40…+70 °C Storage temperature -40…+85 °C Relative humidity 100 %, indoor use (UL only) Overvoltage category Weight 595 g Operating height Max. 5000 m Protection class IP65 IP67/IP69K (not evaluated by UL) Pollution degree...
- Page 22 Supply voltage 24 VDC ±10 % Input current I 9 A (total per module) Output current I 1,5 A (per output) Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
- Page 23 Turck Subsidiaries - Contact Information Germany Hans Turck GmbH & Co. KG Witzlebenstraße 7, 45472 Mülheim an der Ruhr www.turck.de Turck Australia Pty Ltd Australia Building 4, 19-25 Duerdin Street, Notting Hill, 3168 Victoria www.turck.com.au Belgium TURCK MULTIPROX Lion d'Orweg 12, B-9300 Aalst www.multiprox.be...
- Page 24 Árpád fejedelem útja 26-28., Óbuda Gate, 2. em., H-1023 Budapest www.turck.hu Turck Inc. 3000 Campus Drive, USA-MN 55441 Minneapolis www.turck.us Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
- Page 25 Over 30 subsidiaries and over 60 representations worldwide! 100023210 | 2021/11 100023210 www.turck.com...
Need help?
Do you have a question about the TBEN-L-SE-U1 Series and is the answer not in the manual?
Questions and answers