Accu-Scope SKYE WiFi 2 Manual page 7

SKYE WiFi 2 Digital Camera (CAT # AU-500-WIFI2)
current 1500mA under WiFi connection mode.
③C-mount thread: camera can be installed using a standard C-mount
microscope adapter; other adapters can be use to install the camera using
different microscope interfaces (refer to Chapter 5 for specifications).
④Dustproof Cover: remove before use. Provides dust prevention and chip
protection prior to installation.
⑤LED Lights:
Two color Lights:
●USB mode: Red lights
●WiFi mode: Flashing blue lights.
⑥
WiFi signal switch/reset button hole
Short press: press 1-3 seconds to switch WiFi signals (2.4G to 5G, and vice
versa)
Long press: more than 10 seconds, restores the default Settings
⑦ USB line: USB power supply.
User Manual
Note: The default WiFi output signal is 5G; 2.4G and 5G
signals can be switched by pressing the reset hole with
a straightened paper clip for 1-3 seconds.
- 5 -
https://accu-scope.com/
AU-500-WIFI2 V1.3