Chapter 6 Instructions; Usb Wired Work Mode; Install Skye View™ 2 Software; To Connect Device - Accu-Scope SKYE WiFi 2 Manual

SKYE WiFi 2 Digital Camera (CAT # AU-500-WIFI2)

6.1 USB Wired Work Mode

6.1.1 Install SKYE View™ 2 Software
Download the Windows PC installer file by navigating to accu-scope.com >
Support > Software & Updates, and scroll to locate SKYE View
Software. NOTE: only SKYE View 2 software is compatible with SKYE WiFi 2
cameras.

6.1.2 To Connect Device

(1) Connect the USB-A port of the USB cable to the USB port of the
computer.
(2) Turn the WiFi Digital Camera work mode switch to USB work mode. A
reminder to install the device's driver may appear when you first use the
WiFi mode. The camera and system will automatically finish
installation.
Open
6.1.3 Software
(1) Ensure that the WiFi Digital Camera is secured to the microscope, and
focus on the sample for observation.
(2) Launch the SKYE View 2 software in your computer to observe your
needed image.

6.1.4 Start to Use

(1) Using the eyepieces, focus on the sample.
(2) Observe the live image in the software. If available, adjust the camera
adapter to focus the image on the monitor so that it matches the image
seen in the eyepieces.
(3) For more detailed instructions, please refer to User Manual of SKYE
View 2 software.

6.2 WiFi Work Mode - iOS System

6.2.1 Install SKYE View 2 app for iOS

Download and install SKYE View 2 from the Apple APP Store. Be sure to
download the correct version – only SKYE View 2 will operate this camera.
User Manual

Chapter 6 Instructions

- 9 -
https://accu-scope.com/
AU-500-WIFI2 V1.3