SKYE WiFi 2 Digital Camera (CAT # AU-500-WIFI2)
6.2.2 To Connect Device
(1) Connect the USB-A port of the USB cable to the USB port of the USB
power adapter. Plug the USB power adapter into a 110V power outlet.
(2) Turn the work mode switch of the WiFi Digital Camera to WiFi work
mode. After about 20 seconds, the WiFi indicator in the WiFi camera
stops flashing and stays on.
(3) In the Settings of the iOS device, choose WiFi Digital Camera as the
WiFi network. The camera will appear as WiFi name:
WiFiCamera_xxxxxx (2.4G mode) or WiFiCamera_5G_xxxxxx (5G
mode).
(4) Enter the password to connect: 12345678
6.2.3 Open Software
(1) Ensure that the WiFi Digital Camera is secured to the microscope, and
focus on the sample for observation.
(2) Launch the SKYE View 2 app on your mobile device.
6.2.4 Start to Use
(1) Touch the icon to observe the image.
(2) For more detailed instructions, please refer to User Manual of SKYE
View 2 app for iOS.
6.3 WiFi Work Mode - Android System
6.3.1 Install SKYE View 2 app for Android
Download and install SKYE View 2 from Google Play. Be sure to download the
correct version – only SKYE View 2 will operate this camera.
6.3.2 To Connect Device
(1) Turn the work mode switch of the WiFi Digital Camera to WiFi work
mode. After about 20 seconds, the WiFi indicator in the WiFi camera
stops flashing and stays on.
(2) In the Settings of the Android device, choose WiFi Digital Camera as the
WiFi network. The camera will appear as WiFi name:
WiFiCamera_xxxxxx (2.4G mode) or WiFiCamera_5G_xxxxxx (5G
mode).
(3) Enter the password to connect: 12345678
User Manual
- 10 -
https://accu-scope.com/
AU-500-WIFI2 V1.3