1. Remove (unplug) all loads from the AC outlet Terminals.
2. Turn the AC circuit breaker to the "OFF"
position
3. Turn the fuel valve to the "ON" Position.
4. Turn the Choke lever to the "CLOSED" position.
5. Turn the engine switch to "ON".
6. Gently pull the starting pull handle until some resistance
is felt and then pull it abruptly.
7. Once engine has warmed up, turn the choke lever to the
"OPEN" position.
Starting the Generator
AC Circuit Breaker
ON
OFF
Choke
CLOSED
Fuel Valve
OPEN
7
AC Outlet Terminals
Choke Lever
On/Off Switch
Start Pull Handle
Need help?
Do you have a question about the ELECTRIC GENERATOR and is the answer not in the manual?