Advertisement
INSTALLATION
Mounting the Light Fixture:
For best performance, mount the light fixture about 8 feet
(2.4 m) above the ground.
1. Press the bottom tab of the wall mounting plate and
slide the mounting plate from the light body.
2. NOTE: The mounting holes are not pre-drilled in the
wall mounting plate. Drill the necessary holes in the
indented areas for the mounting screws.
Using the wall mounting plate as a template, mark the
position of the mounting holes. Use the two screws
and wall anchors (provided) to mount the wall plate
to a solid surface. Make sure there is enough verti-
cal space above the mounting plate to allow the light
fixture to be mounted.
3. Slide the power switch located on the rear of the light
to the OFF position. Press up on the battery compart-
ment cover locking tab and swing the cover out and
down to remove.
2
Power
Switch
Battery
Compartment
Cover
Locking
Tab
Advertisement
