Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Health Zenith Manuals
  4. Lighting Equipment
  5. HZ-5990
  6. Manual

Health Zenith HZ-5990 Manual

Led battery-powered motion sensor light
Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
LED Battery-Powered
Motion Sensor Light
Model HZ-5990
FEATURES
• 180° motion sensor
• 200 lumen LED output
• 5000K color temperature
• No wiring required
• Wall mount only
© 2015 HeathCo LLC
UNPACKING
Be sure to remove all contents from packaging and verify
all items are present before assembling this light fixture.
This package includes the following items:
Light Fixture
Mounting
Screws and
Wall Anchors (2)

Advertisement

loading

Related Manuals for Health Zenith HZ-5990

Summary of Contents for Health Zenith HZ-5990

  • Page 1 Be sure to remove all contents from packaging and verify all items are present before assembling this light fixture. This package includes the following items: LED Battery-Powered Motion Sensor Light Model HZ-5990 FEATURES Mounting • 180° motion sensor Screws and Wall Anchors (2) •...

  • Page 2: Installation

    INSTALLATION 3. Slide the power switch located on the rear of the light to the OFF position. Press up on the battery compart- Mounting the Light Fixture: ment cover locking tab and swing the cover out and For best performance, mount the light fixture about 8 feet down to remove.

  • Page 3: Final Adjustment

    4. Install three, 1.5V AA batteries (not included) into the 6. Place the top rear of the light fixture over the wall battery compartment. Make sure the polarity of the mounting plate and slide the fixture down onto the batteries is correct. Replace the battery compartment wall mounting plate.

  • Page 4: Battery Replacement

    GENERAL ELECTRICAL AND Motion Sensor: The motion sensor is fixed with a 180° detection range. SAFETY WARNINGS • Do not immerse components in liquid. BATTERY REPLACEMENT IMPORTANT: Properly dispose of drained batteries. 1. Press the bottom tab of the wall mounting plate and slide the light fixture up and off of the mounting plate.

  • Page 5: Troubleshooting Guide

    TROUBLESHOOTING GUIDE SYMPTOM POSSIBLE CAUSE SOLUTION Light does not activate in 1. Power switch is in OFF position. 1. Turn power switch to the ON position. normal operation. 2. Weak battery. 2. Check battery charge and replace if necessary. Lights come on for no appar- Light control may be sensing small animals or Reposition light away from the area of movement.