AEG S93000KZM0 User Manual page 6

6 www.aeg.com
It is possible to change predefined
sound of buttons by pressing together
Display
A) Timer function
B) COOLMATIC function
C) MinuteMinder function
D) ChildLock function
E) Alarm indicator
F) Temperature indicator
3.2 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off.
The alarm buzzer could operate after few
seconds.
The temperature indicators show the set
default temperature.
To reset the alarm refer to "High
temperature alarm".
To select a different set temperature
refer to "Temperature regulation".
If "dEMo" appears on the display, refer
to "What to do if..." chapter.
3.3 Switching off
1. Press the appliance ON/OFF button
for a few seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.
3.4 Temperature regulation
The set temperature of the fridge may be
adjusted by pressing the temperature
button.
Default temperature:
• +5°C for the fridge
If the door remains open for
some minutes, the light will
turn off automatically. The
light is reset by closing and
opening the door itself.
Mode and Temperature colder button
for some seconds. Change is reversible.
A B C D E
The temperature indicator shows the set
temperature.
3.5 COOLMATIC function
If you need to insert a large amount of
warm food, for example after doing
grocery shopping, we suggest activating
the COOLMATIC function to chill the
products more rapidly and to avoid
warming the other food which is already
in the refrigerator.
1. Press Mode until the corresponding
The COOLMATIC indicator flashes.
2. Press OK to confirm.
The COOLMATIC indicator is shown.
3.6 Door open alarm
An acoustic alarm will sound if the door
is left open for a few minutes. The door
open alarm conditions are indicated by:
• a flashing Alarm indicator;
• an acoustic buzzer.
When normal conditions are restored
(door closed), the alarm will stop. The
buzzer can also be switched off by
pressing any button.
F
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
icon appears.
The COOLMATIC function
shuts off automatically after
52 hours. To switch off the
function before its automatic
end, repeat the steps until
the COOLMATIC indicator
goes off.