PT-56LCX70 / PT-61LCX70 / PT-50LCX7 / PT-56LCX7 / PT-61LCX7
HOW TO REPLACE THE LAMP UNIT
Note:
Lamp debris may be noticed in the lamp compartment area after the rear cover is removed.
If present, follow the notes in the disassembly procedure.
if not, disregard these notes.
LAMP CAUTION:
The Lamp Unit becomes very hot during
operation. When replacing the Lamp Unit,
wait until it has cooled off (1 hour or more).
a. Removal of Rear Cover
1. Remove the Rear Cover by removing the 12 screws then pinching the 3 latch tabs.
Rear Cover
Latch tabs
401
Fig. D1-1
34