Panasonic PT-56LCX70 Service Manual page 12

PT-56LCX70 / PT-61LCX70 / PT-50LCX7 / PT-56LCX7 / PT-61LCX7
TO READ THE PEAKS SOFTWARE
VERSION AND TV MICROCONTROLLER
SOFTWARE VERSION
1. Press MENU key with the power on.
2. Press CH UP/DOWN key and select "Setup."
Then press OK key.
3. Press CH UP/DOWN key and select "About."
Then press OK key.
4. Select "Version" and press OK key.
Version menu will appear as shown below.
0081-4506
Read every
other number
from the right:
Peaks software
Ver. : 0.480
INSTALLATION DIMENSIONS DIAGRAM
Read every
other number
from the left:
TV Microcontroller
software Ver. : 0.156
12
LAMP CAUTION
The Lamp Unit becomes very hot during operation. When
replacing the Lamp Unit, wait until it has cooled off (1 hour or
more).
TOP DUCT UNIT NOTE
The optical parts will be exposed to the dust in the air when the
Top Duct Unit is removed. Therefore, it is strongly recommend
to remove the Top Duct Unit only in a clean room.