Standard Fittings; Location For Installation - Lennox VEMD007N432U Installation Manual

Multi Variable Air Conditioners Duct Type Indoor Unit

4.1 Standard Fittings

Please use the supplied standard fittings listed below as instructed.
No. Name
wire controller package
(including wire controller,
1 emergency bottom case,
instruction manual, screws,
packing box)
2 Remote controller
3 Sponge for drainage pipe
4 Insulating materials
5 Corrugated pipe
6 Union nut
Spring washer M8, nut M8,
7 nut with washer M8, washer
M8
8 Tieline
9 others

4.2 Location for Installation

(1) The top holder must be strong enough to support unit's weight.
(2) Drain pipe can drain water out easily.
(3) There is no obstacle at inlet or outlet. Please ensure good air circulation.
(4) In order to make sure the space for maintenance, please install the indoor unit according to
the dimension described below.
(5) Keep the unit away from heating source, inflammable gas or smoke.
(6) This is a concealed ceiling type unit.
(7) Indoor unit, outdoor unit, power cord and electric wire should stay at least 1m from the TV
set and radio. Otherwise, these electrical appliances may have image interference and
noise (Even if the distance is 1m, when there is strong electric wave, noise may still occur).
(8) The appliance shall not be installed in the laundry.
Graphics
User Manual: 1 copy
Loosen-leaf of Instruction Manual: 1 copy (harmful substance content table)
Qualified Certificate: 1 copy
Bar Code : 1 copy
5
Quantity Purpose
1set Control indoor unit
optional parts
0 or 1 (including #7
batteries)
wrap water pipe and
2 rubber cork for
condenser
used for the joint of
2 gas pipe and liquid
pipe for indoor unit
Diameter of air
0 or 1
pipe≥15.9mm
one for the model with
1 or 2 corrugated pipe; two
for other models
Used for hanging the
4
indoor unit
Wrap the sponge at
the connection
6
position