Table of Contents
Advertisement
On-Screen Display (continued)
Channel Manager
Select CHANNEL MANAGER to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel List.
Select "Channel Manager" from Menu list.
Audio/Video
Channel Manager
Locks
+
Timers
Setup
Move
Selected Items
Signal Meter
*
Auto Channel Scan
Channel List
**
NOTE
*
The Signal Meter will not be available (grayed out) when watching analog channels.
The Channel List cannot be updated by only changing the cable source. Auto Channel Scan must be performed
**
for the Channel List to be updated.
United States federal law requires broadcasters to stop transmitting analog (non-digital) television signals after February 17, 2009.
Accordingly, this TV's analog tuner will not be capable of receiving over-the-air analog television broadcasts after such analog
broadcasts are no longer available.
After February 17, 2009, this TV's analog tuner will continue to work with compatible cable and satellite TV systems, gaming
consoles, VCRs, DVD players and other similar products.
Both before and after February 17, 2009, this TV's digital tuner will receive available over-the-air digital television broadcasts using
an antenna and other digital television broadcasts using compatible cable, satellite or other digital television system connections.
Please review this Operating Guide for further information regarding such connections.
Hitachi supports the DTV transition and as a member of the DTV Transition Coalition urges consumers to visit these web sites for
interactive guides and further detailed information:
•
www.dtvtransition.org
•
www.myceknowhow.com
•
www.dtv2009.gov
•
www.youtube.com
OR
Select
SEL
Select SIGNAL METER when using an indoor or outdoor antenna. This feature will
show the signal strength and peak values of the Antenna signal to help you adjust
your antenna to optimize signal reception.
This feature will automatically store active Analog and Digital channels in Auto
Channel Scan memory.
1.-Use the
button to highlight AIR or CABLE source.
◄►
2.-Then use the
◄►
option.
This function allows you to review which channels are labeled (ID), which have been
added to CHANNEL MEMORY (SKIP), which are protected by LOCK and which are
your FAVORITE (FAV) CHANNELS.
1.-Use the
button to navigate the Channel List.
◄►
2.-Use the
button to select ON or OFF on the SCAN and LOCK columns.
OK
3.-To select LOCK column, input the access code.(Default access code: 0000).
4.-Press the FAV CH button to set or remove the FAVORITE settings.
IMPORTANT NOTICE
Channel Manager
Signal Meter
Auto Channel Scan
Channel List
Move
Select
SEL
Setup hint
and
buttons to highlight and select the START or RESET
OK
28
Advertisement
Table of Contents
