How To Use The On-Screen Display (Osd) System; Select Language - Hitachi AVC01U Operating Manual

SETUP OPERATION

How to Use the On-Screen Display (OSD) System

You can use the On-Screen Display system to access the various kinds of the features and functions of your A/V
Center.
Basic Operation
1. Press the
button on the remote control or the Menu button on the
control panel underneath the UT monitor. The Main Menu is displayed on the
screen as shown on the right.
2. To select the A/V Center menu, press the
The A/V Center item will be highlighted in Yellow.
3. Press the
button to set your selection.
OK
The A/V Center unit menu page will be displayed on the screen.
4. Use the
button to choose the item on the menu page.
Press the button to set your selection.
OK
5. Use the
button to adjust the item values or choose options.
◄►
Press the button to set your selection.
OK
6. To exit from the menu, press the
NOTE
The OSD menu screen will be closed automatically when no operation has
been made for about one minute.
If the item on the menu is shown in gray, it means that it cannot be selected
or adjusted.
In order to appear A/V Center menu on Main Menu, A/V Center Control need
to be activated on Funcion/HDMI Control menu.

Select Language

Select the language from the list so that the OSD menu can be displayed in the selected language.
The default setting is English (US).
How to set Language
1. Enter the "Language" menu from the Main Menu.
2. Select your preferred language from the list using the
The selected item will be highlighted in Yellow.
3. Press the
button to set your selection.
OK
The mark on the left turns into a double circle when the selection is fixed.
4. Press the
button to exit from the entire OSD menu.
NOTE
When the Language is set on Main Menu the A/V Center menu automatically set to that language, please note
that English, Spanish and French are supported by A/V Center.
25
button.
or the button.
button.
Menu button
Picture
Audio
Function
Setup
Language
AV Center
Select OK Set
<Main Menu>
Audio/Video
Channel Manager
Locks
Timers
Setup
Move
<A/V Center Menu>
UT Monitor
Control panel
Menu button
Language
English
English (US)
Français
Español
Deutsch
Select OK Set
Select
OK
Return