Connecting To Equipment Having An Audio Digital Input Terminal; Connect Your A/V Center To The Ut Monitor - Hitachi AVC01U Operating Manual

CONNECTION (continued)
1. Connect your Equipment to the A/V Center (continued)
Connecting to Equipment Having a Audio Digital Input Terminal
The A/V Center "OPTICAL OUT" Audio terminal can be connected to devices equipped with Optical Input
capabilities such as Audio Amplifiers Systems. The "OPTICAL OUT" from the A/V Center Rear Panel is a fixed
output. The Volume of the amplifier is controlled by the amplifier, not by the A/V Center Unit. The OPTICAL
OUT terminal outputs all audio sources.
2. Connect your Audio Video Center to the UT Monitor
The A/V Center HDMI output terminal (AV Out) is connected to the UT Monitor. Only one cable is used to transmit
all video/audio/control signals, thus facilitating an easy connection. Moreover, the digital signals can produce high
quality data without any degradation.
15
Optical
OUT
OUT
(Audio)
OUT
IN
STEREO SYSTEM
IN
HDMI Cable
[Example]
OPTICAL
IN
AMPLIFIER
Power Cord