Specifications - Hitachi HV-D30 Operation Manual

Specifications

1) Color system
2) Optical system
3) Imaging system
4) Picture elements
Total pixels
Effective pixels
Effective image area
5) Scanning system
6) Scanning frequency
7) Encoder system
8) Sync system
9) Horizontal resolution
10) S/N
11) Standard sensitivity
12) Minimum illumination
13) Gamma correction
14) Geometric distortion
15) Registration
16) Vertical contour compensation
17) Lens mount
18) Sensitivity selection
19) Detail control
20) Scene files
21) Digital gain
48
NTSC, PAL
1/3-inch, F2.2 prism
R, G, B 3 CCD
Corresponding to 1/3-inch interline transfer CCD
(with microlenses)
NTSC 811 (H)
PAL 795 (H)
NTSC 768 (H)
PAL 752 (H)
NTSC 4.88 (H)
PAL 4.89 (H)
2:1 interlace
NTSC 15.735 kHz (H)
PAL 15.634 kHz (H)
R-Y/B-Y
Internal/external
(VBS, BBS or HD/VD auto selection, when
internal input/output switch is input position)
800 TV lines, luminance signal center
(Y out and DTL off)
NTSC 64 dB type (DNR on), 61 dB type (DNR off)
PAL 62 dB type (DNR on), 59 dB type (DNR off)
(Y out,
2000 lx, F9.5
0.9 lx
(50 IRE, F2.2, GAIN +24 dB, DIGITAL GAIN +12 dB)
0.45/1.0 (on/off)
Full screen 0% (not including lens characteristics)
Full screen 0.05% (not including lens characteristics)
2H
C mount (flangeback 17.25 mm in air)
AGC (0 to +24 dB)
or GAIN (0 to +24 dB step1dB or step 3 dB on
DTL level and frequency
4 Files
+6 dB, +12 dB sensitivity increase
by digital signal processing
508 (V)
596 (V)
494 (V)
582 (V)
3.66 (V) mm
3.64(V) mm
59.94 Hz (V)
50.00 Hz (V)
=1, DTL off, GAIN 0 dB)
remote control menu)